EVF G2 Dual 15" subwoofer
EVF G2 Series
EVF-215S G2
Front-loaded 15-inch point source reaching 40 Hz — full-range mains without leaning on subwoofers.
The G2 generation rebuilds the Electro-Voice point-source install range from the inside out. New in-house EV transducers, low-loss crossovers, and EV's highest-performance HF horns sit in the same footprint as the first generation, while new low-latency FIR presets deliver flat phase response with under 10 ms of system latency. The updated grille withstands high SPL even when wet, the enclosure is fully front-serviceable, and a single-step polyurea finish keeps white cabinets UV-stable outdoors.
The EVF-15 G2 steps up to a front-loaded 15-inch design that reaches 40 Hz (−10 dB) — full-range mains for mid-size rooms without adding subwoofers. Four coverage patterns (60°×40°, 60°×60°, 90°×50°, 90°×90°) carry 117 dB linear and up to 136 dB peak output (AES75) from 400 W continuous power handling, at 38 kg per cabinet.
What the EVF-15 G2 brings
Four coverage patterns
60°×40°, 60°×60°, 90°×50°, and 90°×90° with matched voicing across the G2 family.
Reach to 40 Hz
Front-loaded 15-inch low end runs full-range in mid-size rooms — no subwoofer required.
G2 acoustics
New in-house transducers, low-loss crossovers, and EV's highest-performance HF horns — in the first generation's footprint.
FIR-ready processing
Low-latency FIR presets with flat phase response; system latency under 10 ms.
Weatherized options
IP55 fully-weatherized versions handle full exposure, including high-salt marine air (moisture cover + 5° down-tilt).
Front-serviceable
Wet-rated grille with front service access; single-step polyurea finish in RAL9005 black or UV-stable RAL9003 white.
Case study
Built for the room
At 7th Street Entry, a historic club got a system built for the room: EVF G2 loudspeakers driven by Dynacord iX amplifiers. The smaller G2 footprint cleaned up sightlines, and the new coverage patterns gave engineers more consistent sound across the floor.
Frequency response (−3 dB): 38 Hz – 100 Hz · range (−10 dB): 32 Hz – 140 Hz
Max SPL (AES75): 126 dB linear / 137 dB peak
Power handling: 800 W continuous / 1600 W program
Nominal coverage: 360°
Weight: 69 kg (152 lb) · RAL9005 black / RAL9003 white · IP55 on FW (outdoor/wet/salty) models with moisture-resistant cover and min. 5° down tilt
All figures from the EVF-215S G2 engineering data sheet.
Features
Put the floor under the whole system. The EVF-215S G2 pairs two all-new 15-inch EV drivers and pulls the low end down to 32 Hz, with 126 dB linear and 137 dB peak output that fills a big room. It handles 800 W continuous at 4Ω and hangs from 28 M10 rigging points, so it flies or stacks. Stadiums, performing-arts halls, high-SPL music — pair it with a Dynacord IX-series amp and the bottom octave shows up.
- Reaches the bottom — dual 15-inch drivers down to 32 Hz.
- Fills the room — 126 dB linear, 137 dB peak output.
- Real power — 800 W continuous at 4Ω nominal impedance.
- Flies or stacks — 28 M10 rigging points for ground-stacked or suspended arrays.
- Built to pair — tuned for Dynacord IX-series DSP amplifiers; IP55 with the cover fitted.
Specifications
Overview & Features
- Configuration
Dual 15-inch passive subwoofer
Acoustic Performance
- Max SPL
137
- Frequency Response
32 Hz - 140 Hz
- Coverage Angle
360
Transducers & Drivers
- Woofer Size
Dual 15-inch
Power & Amplification
- Power handling (continuous) (W)
800
All Point-Source Speaker Families
Explore